D-C-FIX WATERPROOF WALLPAPER BLUE MOROCCAN CERAMICS RIASAN TILE EFFECT

D-C-HOME WATERPROOF WALLPAPER BATHROOM KITCHEN BLUE MOROCCAN CERAMIC  RIASAN TRENDY TILE EFFECT

Size: 4m X 67.5cm

This wallpaper is meant to run across the wall and not down, so perfect as a kitchen splash-back where you'll have a continuous design and no annoying joins for 4m

FEATURES & BENEFITS 

• Easy to apply, no need for a professional 
• Cost saving alternative to re-tiling, ideal for rentals 
• Realistic 3D designs on a 67.5cm x 4m roll 
• Horizontal application reduces number of joins 
• Water resistant - ideal for kitchens, bathrooms, utility rooms
• Hard wearing 
• Wipe clean 
• Easy to remove 
• Glue required for installation 

An ideal solution for covering over old tiles in your kitchen or a new splashback for your bathroom, this durable and waterproof 3D wallpaper is the perfect cover up!

Preparation of under-surface and individual sections

Surfaces (tiles or walls) should ideally be smooth, solid, dry and free of cracks and holes. Any uneven areas must be corrected by the use of appropriate filling material filler for absorbent under-surfaces.

Cut the first strip from the roll by placing the beginning of the pattern at the top and allowing a slight overlap at the bottom.

Application of adhesive

For absorbent under-surfaces, such as cement or plasterboard, use a normal commercial wallpaper paste for heavy-grade wallpapers (e.g. Metylan Special). Apply the paste to the cut strip, fold it together and allow it to absorb the paste for about 10 minutes.

For non-absorbent under-surfaces, for example oil-treated or painted areas, use normal commercial dispersion adhesive (e.g. Ovalit S). Moisten the rear surface of the strip with water, allow it to soak in for about 10 minutes and then apply the adhesive to the wall over the area intended for the cut strip.

You should always follow the application instructions provided by the adhesive manufacturer.

Application of wall covering

Apply the first strip, starting at the top, and ensure vertical alignment. Cut the next strips so as to ensure the alignment of the tile pattern, with the necessary overlap at top and bottom, and place it next to the previous strip after applying adhesive. Avoid the need to make joins in the corner the rooms.

Attention: Immediately remove any spots of adhesive with clean water!

Sealing 

In particular in rooms which are subject to moisture, it is essential to ensure that all edges and joins are sealed with PVC cold welding paste (for PVC wall coverings). This prevents moisture from penetrating underneath the wall covering. When finished, ensure that the room is well ventilated!

Cleaning and care

Ceramics wallpaper is completely waterproof. It is therefore easy to undertake cleaning and maintenance. The cleaning can, for example, be carried out with mild liquid commercial cleaners, soapsuds or similar. Afterwards, always wash the wall covering thoroughly with clean water.

Warning: Always avoid contact with acetone, cleaning solvents and direct heat!